1646 (1 gal), 1647 (5 gal), 1648 (55 gal) X-3 Concrete Sealer
Concrete Sealer X-3 can be applied on all types of decorative and stained pavers, aggregate driveways and walkways, bricks, clay tiles, sandstone, limestone, marble, granite, slate and any natural stones. It can be used on above grade plaster and stucco providing a breathable barrier against water, stains and acids and will seal hair line cracks. The product can also be used to seal swimming pools and fish ponds to prevent water escaping through the concretes' capilliaries and pores. It can also be used in dog kennels and agricultural institutions to provide stain resistance which assists in the maintenace of these enclosures.
Concrete Sealer X-3 is a DIY type product which is easy to apply using a brush, medium nap roller or low pressure sprayer at any temperature between 40 and 80 degrees F. The surface to be treated does not need any special treatment but it must be oil and dust free to allow proper penetration of the product. It will cover approximately 200 to 400 square feet per gallon depending on the concrete porosity and two coats are recommended. Typically a 5 gallon pail will seal a maxumim of 1,000 square feet of poured concrete using the two required applications(2,000 sq ft total) but this coverage can be lower depending on the porosity
Concrete Sealer X-3 leaves a natural finish (no sheen) after application and the surface will not be slippery.
Click to main page